New Arrivals/Restock

Seco-Larm EV-Y6201-A3WQ 4-in-1 HD TVI, CVI, AHD, Analog UFO Camera

flash sale iconLimited Time Sale
Until the end
04
31
02

$43.87 cheaper than the new price!!

Free shipping for purchases over $99 ( Details )
Free cash-on-delivery fees for purchases over $99
Please note that the sales price and tax displayed may differ between online and in-store. Also, the product may be out of stock in-store.
New  $87.75
quantity

Product details

Management number 205060874 Release Date 2025/10/16 List Price $43.88 Model Number 205060874
Category
  • 1080p Resolution
  • 3.7mm Pinhole lens rotates to nearly any angle for flexible installations
  • 3D-NR (3D Digital Noise Reduction)
  • DWDR (Digital Wide Dynamic Range)
  • Low 0.1 Lux rating
  • Joystick OSD control for easy camera programming
  • Small size protrudes only 1″ (26mm)
  • Weatherproof (IP66) construction
  • Low-profile design blends in with nearly any decor

 

Specifications

Housing Color White
Type Flush-Mount UFO Camera
Image sensor 1/2.9″ 2MP Sony CMOS
Formats TVI (default) / CVI / AHD / Analog
Resolution 1920×1080
Viewing Angle 80°
TV Lines 1200TVL
3D-NR Yes
2D-NR Yes
DWDR Yes
Cable OSD Control Yes
On Screen Display (OSD) Yes
Megapixels 2MP
Minimum Illumination 0.1Lux
Video Output 1.0Vp-p Complex video output
FPS 30FPS
Lens 3.7mm Pinhole lens
F Stop F1.4
S/N Ratio 50dB
DSS (Digital Slow Shutter) Yes
Shutter Control Auto/Manual (x30~1/50000), FLK
Operating Voltage 12VDC
Current Draw 90mA
Gamma Correction 0-1
Gain Control Yes
White Balance Auto, Day & Night
IP Rating IP66
Operating Temperature -4°~131° F (-20°~55° C)
Dimensions 3″x3″x1″ (77x77x26 mm) (Protruding from wall)
Weight 9.9-oz (280g)

 

Troubleshooting

The screen is black
  • Check that the camera is powered up.
  • Check that the power supply’s polarity is correct.
  • Check that the monitor is powered up.
  • Check that the video cable connecting the camera to the monitor is connected properly.
The screen image is dim
  • Clean the lens using a soft, clean cloth.
  • Check that the light source is adequate.
The screen has poor contrast
  • Adjust the monitor’s contrast knob
  • Change the position of the camera
The screen image flickers
  • Change the position of the camera, check cables and format setting
The screen image is distorted.
  • Change the position of the camera, check cables and format setting
The camera case is hot
  • Check that the correct power supply is in use

Correction of product information

If you notice any omissions or errors in the product information on this page, please use the correction request form below.

Correction Request Form

Product Review

You must be logged in to post a review